About Rachel
View all posts by Rachel
Another Worktop Bin
Diamond Framework
The first worktop bin was such a success that I decided to do another one.
This time the bin itself is a cardboard drum that used to contain chocolates. It’s rather bigger than my sawn-off milk bottle, and furthermore, the canvas is finer (I’m only using two strands of Paterna in the needle, not three), so the canvas is going to take a little longer to do.
Stage Two
I’m staying with browns, and with diamond patterns, and starting with this diamond lattice pattern. I’ve had enough of the creamy beige wool to work the framework, and since it is only two strands, I should have enough of it to work the edging and seam as well.
But there is a lot more dark brown to come and I may very well find myself combining threads to stretch my varieties of dark brown to fit the pattern. Never mind, I will then have made some Stashbusting Progress!
Stage Three
Has anyone else noticed what a very inexact science stashbusting is? You embark on a project, full of hope that it will consume vast stores, only to find that the Stash in question has shrunk not at all…
Right up until the project when you rely on that happening….
Shadow Play
Printed on gauze
I decided, as I stared at the printing of this blocky pattern onto gauze, that I wanted to use the transparency of the gauze as part of the finished effect.
I don’t have a destination in mind for this piece which will give me a theme, so I decided that, in order to highlight that one quality, I would use a single thread (as it happened, a variegated silk), and design a fragment that would allow me to experiment with the effect of stitch cover and openness.
Sketching
I leafed through books about pattern, saw nothing that gave me the combination I wanted, and then evolved the fragmentary organic sketch on the far left to give me the balance of line and form I was looking for. Incidentally, this is quite possibly the swiftest and shortest progression of any sketched design I’ve ever come up with!
Finished Fragment
It’s astonishingly difficult to trace a design onto a fabric which is essentially invisible, and still harder, I might add, to follow the lines when you have finally put them there!
I used Hungarian Braided Chain Stitch for the stem, satin stitch for the solid side of the leaf, and Jacobean trellis for the flower-head. Clearly that gives me a solid coverage, and a firm line; I was hoping that the Jacobean trellis might offer a sort of half-shade.
Shadow Play
A qualified success, I’d say. The printed pattern doesn’t create a shadow, and the Jacobean trellis shadow isn’t a sort of half-depth.
But, my goodness, the shadow of the stem and the leaf work exactly as I hoped! The gauze itself almost disappears, leaving the printed pattern floating above the surface, and the leaf and flower thrown forward by their shadows.
The Head of Nefertiti, Embellished with Silk and Gold
Screenprint of the Head of Nefertiti
This is much the best print I’ve managed of Nefertiti, pressure, speed and amount of ink all working nicely, and very few really dark sections. What I want to do now is to highlight the coloured elements of the crown she wears – unique to her, apparently, no-one else in ancient Egypt has ever been depicted wearing it. I’ve got some gorgeous silk threads from Mulberry Silks which should do the job perfectly, but first they need a skeleton of gold. I had a lovely rummage in among the assorted wonders I’ve received from Thistle Threads (they have their own special box, of course), and after staring critically at the linen fabric, picked out the Special Tambour, and made a start.
My idea is to create a framework of Ladder Stitch, and then add colour – as in the Tudor Rose project – using silk threads. Long term readers may recall that during the Tudor and Stuart Goldwork Masterclass, I had some trouble with Ladder stitch, so although I was fairly sure the idea would work, I sat down with some trepidation.
To be very pleasantly surprised. Something has happened in the intervening few years, and my ladder stitch wasn’t as trying as I expected, and moved fairly swiftly, too. I may yet decide to redo the stitches, because I re-tightened the fabric in the frame about halfway across, but that will depend upon how much better the second section looks when I have done it.
That’s a good start to a new project, isn’t it!
Finishing the Form Cushion – Stage One
Corner of the Form
When I’d finished the stitching of the canvaswork for the Form Cushion, it was a little puffy and warped, and badly in need of blocking, but being long and thin I had nothing suitable for blocking it on. Until I had an inspiration – use the form itself!
We covered the form with an old towel, and then worked on alternate sides of the form. I’ve put an old length of cotton curtain header over the canvas, so that when I come to remove the staples, it will be fairly easy to do.
In theory…
It took quite a lot of heaving and tweaking, and the combined efforts of my mother and myself (for a client, she’s having to put a lot of effort in here, isn’t she! – she’s started on renovating the form too.), but in due course we managed to get the canvas firmly attached, and stood back to look at it.
Taking The Long View
It didn’t look nice and smooth as it does here. It was bumpy and lumpy, and not very happy at all.
So I steamed it gently, using a steam iron but not letting it touch the wool. Very, very carefully, and slowly..
It started looking a great deal better (even upside-down), but then we set it aside, still stapled in place, for a few weeks. We wanted to be sure that it was very thoroughly dry before we moved on to actually making the cushion.
And besides, I’m not entirely clear on the type of cushion it will be!
Three Rabbits – or are they Hares?
Three Rabbits (or Hares) Bag
Rummaging around as I try to reorganise the house, I’ve rediscovered a bag I made some time ago.
The Three Rabbits (or Hares) design is an ancient one, found all along the Silk Route and in many different cultures. I’ve seen it in textiles and ceramics, carved as mere outlines, polychrome with a wealth of fabulous detail. I’ve also seen variants with animals other than hares, and even variants with more animals in the circuit.
Close up of the rather travel weary hares on David’s bag
I think I first encountered it when I first met David Singmaster, the mathematician and metagrobologist – it’s one of his many interests, and he has a drawstring bag decorated with the design that he takes everywhere, stocked with mathematical puzzles and games to entertain anyone who comes near. I saw it recently when David and his wife were at a conference my husband and I attended, and his wife remembered that her mother had had to remind her of how to do the French Knots for the eyes. I took delight in noting the puzzled brows that ensued whenever David took anything out of the bag!
My version is one of the simplest, I suspect. I designed a very simple circuit of hares (or rabbits!), and embroidered it using chain stitch on a russet coloured furnishing fabric. The bag is padded with wadding and lined with the same fabric.
Bunny Buckle
Finally I designed a small buckle-type ornament made of a strip of fabric embroidered with a very definite bunny embroidered in stem stitch, and put one on each end of the strap.
I’m intending to do a much more complicated version one of these days, maybe with a mille-fleurs background like the tapestries in the Musée de Cluny.
Watch this space, as they say!
The Worktop bin – finished
Edges turned in
There is always more “engineering” involved in these projects than you expect. Once I’d turned in the edges and done the herringbone stitch “piping”, I realised that the top of the bin was probably going to be on show on the inside. I found some felt to line it with, but since it was a spare offcut, I decided to run a line of straight stitches on the inside, just in case there wasn’t enough of it!
Felt lining attached
I attached the felt with small stitches, not too tightly, but just enough to make sure that it doesn’t move unless I want it too. It’s almost a pre-felt, not too dense, so it showed some adventurous tendencies. Some firm treatment, a tug or two, and it settled down nicely.
Vertical Seam
Which allowed me to consider tackling the seam turning it from a flat piece to a tube. After some of my usual thoughtful staring, it finally occurred to me that I already had the answer: Herringbone stitch, just like the edge finish at the top.
Obvious, really, isn’t it! It makes a sturdy seam which won’t permit much lateral movement, and since I’ve used it on the top edge, it doesn’t introduce yet another texture.
Finished and in service
When it came to sorting out the base, I put the sawn-off milk bottle inside to make sure I made everything fit, and folded in the canvas, holding it with a few rough stitches.
Finally I attached a piece of very dense felt to the bottom to hide all the canvas edges and make sure they don’t scratch any of the furniture. It is already in use, and you have to admit it’s very much better than an unclad sawn-off milk bottle would be!
Experiments for The Head of Nefertiti
Screen and equipment
You may recall that the final “Dreams of Amarna” pair of panels is intended to include the heads of Akhenaten and Nefertiti, screenprinted onto gauze, and floating over the top as free-hanging veils.
I decided to have a small screen done of Nefertiti, in order to practice the technique and experiment with the different types of gauze.
Too heavily printed
The screen duly arrived, and I did about six prints, all of which were dreadful. I put the screen away in disgust and decided to try another time.
This print shows some of the problems. I pressed too hard, obscuring some of the detail and caking the fabric – in this case a linen, because I have a plan to add silk and gold embroidered highlights. It would be impossible to get a needle through, and if I did, a metallic thread would be stripped in short order.
Printnig On Gauze
There’s clearly a trick to it – a combination of pressure (not too much), amount of ink (enough!) and angle of the squeegee (just right).
These two prints on gauze give me some hope. The orangey-terracotta is the small, blocky screen I bought to test out the idea first of all. I’ll embroider something over the top of this, just to see how it works.
And the head of Nefertiti is rather better, too. Next time I get out my Dreams of Amarna pieces to stare at them and play with layouts, I will be able to hang the gauze in front and play with distance and placement.
I’m beginning to think that it isn’t outside the bounds of possibility that I might finish the Dreams of Amarna one of these days, and even be pleased with it!
Coalbrookdale in Cross Stitch
Coalbrookdale – Detail
Many years ago I used to design counted cross stitch kits, and did some for the Ironbridge Gorge Museum. I did think of turning a certain very famous picture into a kit, but since we never finished the test stitch, it is just as well they decided not to go with it.
This is something else we’ve found in a fit of tidying up, and thought,”hmm, we should finish that – it will look good!”
“Coalbrookdale By Night” by Philip James de Loutherberg. Copyright The Science Museum
It was done in the early days of computer-aided cross stitch design. I scanned a postcard of “Coalbrookdale By Night”, in the somewhat apocalyptic vision of Philip James de Loutherberg, and then spent some time tweaking the number of colours the computer used to render the design as a cross stitch piece. One of the problems with this form of computer design was that, no matter how much human intervention was involved, the design tended to end up being a bit spotty.
Coalbrookdale Cross Stitch
You can see that spotty effect in the detail picture above.
The human intervention did at least result in the removal of the entirely superfluous lime green stitches that the computer package used to scatter across every design it was involved in. I never did understand why that happened, but the first change I always had to make was to change the lime green into something more suitable.
What I have to do now is think of something useful to turn it into when it’s finished….
17 UFOs in 2017
Still More Circles
Meredithe (Pomegranate and Chintz) and Anne (Frayed At The Edge) are running a challenge for the year – 17 UFOs in 2017. The idea is not necessarily to finish, but to make substantial progress, on 17 UFOs.
Now, I’m not sure I have that many UFOs, and I have many new projects I want to work on (more on those soon), but I do have a good few that are stalled, or that I’m not sure whether I’ve finished or not, so although I’m not going to join in regularly, I will try to use the impetus of the challenge to remind myself to assess progress.
Blanket Stitch Fans
1 Eve in the Garden of Eden – I really want to finish this so I can sign up for the Stumpwork Lion!
2 Nefertiti Shawl – well, clearly, I want to be able to wear this!
3 Queen Anne style teacloth – this is a travelling project, so it depends on where I go and whether I have light or time to work on it.
From The Back
4 The Modern Stitch-Off – I’m not sure whether this is finished or not, so if I can at least decide that by the end of the year, I’ll be pleased.
5 The Christmas Angel – I was going to work on the Christmas Angel last year between Christmas and Epiphany, and never set a stitch on it.
Shoulder Cape
6 The Faience Necklace – this has been a real trial to me, as I can’t bring the design into focus. I’ve got some lovely silk thread so maybe that will help me to get started.
7 The Swan – I got the first layer of Laid and Couched work done, and have had trouble working out the detail layer…
Swan – First Layer
8 The Unicorn – again, first layer done, details escaping me.
Unicorn – the first layer
I have a lot of other things I want to do, which are barely begun, never mind finished, and as I have said, in the case of several of these projects it is not a matter of simply stitching, so much as deciding what to stitch, and then stitching it.
My real target for the year with these eight is to have finished the Nefertiti Shawl and Eve in the Garden of Eden. Anything else is a bonus!
Continuing The Worktop Bin Cover
Bargello Panel
Once I’d settled on a pattern, it fairly romped along. Ten count canvas is such a lovely rest after the forty count linen of Eve In The Garden Of Eden!
As with the Crazy Canvaswork Cushion, I’m not buying extra wool for this, hence the row of light stitches which aren’t the same shade as the other two. Most of the thread is Paterna Persian Yarn, but the odd one out is Appletons. The texture and level of shine are different, but then, anything will be better than a sawn-off milk bottle!
Edges Turned In
The next stage is to turn in three of the edges. I’m going to use the canvas at the bottom to help create the bottom of the bin, so I’ve left that, but the short edges will be seamed together – somehow (I’ve not solved that puzzle yet!).
Herringbone Edge
I’ve learnt, over the years, that it is better to finish the folded edge of a piece of canvaswork than it is to try to fold the edge to be completely invisible.
So what will be the top edge of the bin has now been finished with herringbone stitch. It creates a lovely piped effect, much denser and firmer than a simple overcast stitch, and that will be very useful to help the bin stand up!