Search Results for: Amarna Family Group
I decided, when it came to it, that I would sign the Amarna Family Group on the gold, rather than on the support. I’ve been regarding the whole process of assembling the stele with something akin to terror, and signing on the velvet just seemed like bridge too far, especially since it would already be stretched on the frame at the time.
It looks a bit squiffy, I admit, but then it always does!
I’ve also painted the background calico with inktense. I’m going to try very hard to ensure that all edges are properly turned, and either concealed by the pile of the velvet or by other means, but knocking back the gleaming cream should help with the camouflage.
Both of these tasks were done while the fabric was still mounted on the frame, but I want that frame for William Marshall, so I’m going to have to get going…
Finally, I screwed my courage to the sticking point, and cut the threads holding the fabric stretched at the sides, at least half expecting some sort of terrible crinkled effect. But no, everything stayed nice and flat. Sighs of relief all round!
I want to pad the goldwork before I apply it to the stele, so the next stage was to use a photocopy of the goldwork to make patterns for the buckram and wadding I intended to wrap it around.
I could see what I was doing much better than the photograph suggests, I promise – although it wasn’t an entirely straightforward process, and I ran out of oomph at that point.
More in another post…
Of course, as I was unpicking the seat, I had to unpick more than just the seat so that I could get to the stitches I needed to unpick (are you keeping up?!). I suppose I should have seen it coming, but the result was some rather uncontrolled gold thread flapping loose. I found myself becoming very afraid that I would end up crossing the gold thread, and that would never do!
So I found a nice, slippy machine thread and used it to tack down the thread in the middle of the unstitched area. I didn’t want to be too thorough, in case I ended up leaving gaps that weren’t there originally, but at the same time I had to control all the threads..
Reinstating the seat was actually rather less troubling than Akhenaten’s kilt, which required some extra thinking about, because of course pleats falling close together, and pleats opened a little as they curve around the body look rather different.
But this is now at the stage where I need to start considering how to mount it, which in turn means, I think, deciding how to assemble a velvet-covered stela. I may need some help…
Episode 55 of SlowTV Stitchery is now live, in which I declare a Year of Experiments, muse on lessons from The Camberwell, and consider the need to develop thread-wrangling techniques.
It has been some time since I reported on the Amarna Family Group, and that is partly because, when I had finished the basic design, I was more than a litttle uncertain how much detail I wanted to add, and quite frankly, I was a little unnerved by the mere idea of adding any detail at all!
However, eventually, I gathered my courage in both hands, and started to make an attempt. First, a few lighter and darker purple stitches on the grapes – I may decide to add more, but I don’t want the details to overwhelm the design.
And this is the point at which I went astray. Whitening the kilt with dark lines for the creases and additional white stitches was rather difficult and stressful, so I moved on to tackle the seat. I tried to add enough details to bring the seat to life and pull it away from the background, but instead found it too detailed, too fussy, drawing the eye away from the warmth of the family group and emphasizing the furniture. Not at all what I wanted.
I left it alone overnight, hoping that it would settle together and I would see it with a clearer eye.
It didn’t settle together, and I did see it with a clearer eye. I was so frustrated and upset, I didn’t stop to take a picture, but sat down, picked up scissors, stitch ripper, tweezers, and a blunt tapestry needle, and unpicked it.
It took all day.
That was some time ago, so Episode 50 of SlowTV Stitchery is about Something Else Entirely. A fishy experiment is introduced and there are some musings on the blending of threads.
As I kept on with the little girls, of course, I kept on with Nefertiti, and eventually tackled the famous profile, which worked better than I feared, although I will admit that the lighting here doesn’t let the skin colour show as much against the gold as it does in real life. Next was the gold uraeus on the headdress, which, as I commented when I worked Akhenaten’s uraeus, does feel rather “peak Ancient Egypt” in the use of gold to hold down gold! Still, the royal blue against the golds is enough to make the heart sing.
You can see here that the blue in Nefertiti’s skirt has been replaced – all but one stitch, which I will have to deal with in the “details” phase of this one – the list for which is getting increasingly full of anxieties!
Nefertiti’s feet were among the anxieties, but as you can see from this photo, just leaving them right to the end was increasingly untenable, in spite of the stool leg and the foot cushion to anchor the gold threads.
However, the difficulty of working them starting away from the rest of the body was also considerable, and I do think I made the right decision in waiting until I could start from the legs!
I’m still not sure whether I will fill in some of the sections of the stool Nefertiti is sitting on. At the moment, it looks strong, but it doesn’t separate itself from the background as much as perhaps it should, especially as the figures are looking so striking. I don’t want Nefertiti to look as though she’s sitting on air!
Episode 28 of Slow TV Stitchery is now live, and it considers the post mortem reputations of kings, the perils of scarifying a lawn, and the expertise of the laundries of Amarna.
So, edges. Obviously, with the straight version of this technique, the edges are simple – either every single one is plunged, or maybe every other one, if the threads are used doubled. I have a strong aversion to plunging threads, I hate waste, and I just couldn’t face the tangles I experienced when I was working on Christus Natus Est.
So the edges of this piece are being done simply by turning the thread back on itself. I will, of course, have to cut the thread to fill in the corners, but that’s much less fuss, and I am intending to oversew each end very firmly, and not plunge the threads at all.
I began on Nefertiti’s dress intending to do something like I’d done with the pleats on Akhenaten’s kilt, but making the lines more definite.
Having started, though, I decided it wasn’t at all satisfactory. Whether it was the wrong colour, the wrong resolution (not that I can make the lines any narrower!), or simply not simple and crisp enough, I’m not sure. I was sure that it needed to come out.
So that’s what I did.
Unpicking is really not fun, and some of the white silk fell victim to my unpicker, so the raggy bits had to be eased to the back and tidied up before I could even think about reinstating the white.
Notice, however, that the little girls are making pretty good sense just as they are!
The next episode of Slow TV Stitchery is up – Episode 24 – which covers Looking ahead to The Next Epic Project, lessons from the Impressionists, and the trick of making a design’s evolution look “meant”. Do go and have a look!
In the end, I sighed, consigned the Cretan memories to perdition, and decided to do the little girls in the same colour as their parents. However, while I was looking at the tangle of limbs and bodies of the two smaller girls on Nefertiti’s lap, I thought that something definite would need to be done to keep them from turning into an amorphous tangle of limbs, something like one of my early memories of my two big cousins. I’ve since got my cousins separated in my head, but I thought it would be nice to keep Nefertiti’s daughters individual from the start!
So I started putting in an outline on the eldest daughter, using a fine, very dark brown thread from Devere Yarns.
Only to stare at it with hostility, because it somehow managed to look a bit too clunky!
Considering that Devere silks are really very fine, this is quite an achievement, although I’ll admit it wasn’t one I particularly cherish.
So I decided to just keep working on the “block colours” of the design and trust to later inspiration to find out how to keep the girls from blurring into an undifferentiated shape. I’ve left a few deliberate gaps where limbs cross, to help the design “read” properly.
And I’m not sure, now, that they really need anything else…
The video is well in advance of these posts, because I lost the photos I was going to use. Heigh-ho. Anyway, enjoy Episode Twenty Two, in which, among other matters, the mathematical concept of “triviality” is discussed…!
While I was stitching round and round in circles, I was also thinking about the rest of the design, and about what else it might be showing.
I had a thought that it might be nice to make a reference to the Cretan art that was so influential for the art of the Amarna period. One of the conventions of the art of ancient Crete was that women were depicted as light-skinned, while the men were shown as tanned, so I thought I would give that a little twist, and work the three daughters as light-skinned, and Akhenaten and Nefertiti as tanned, thus “bookending” the scene.
So I blended a lighter colour and got started on Daughter Number 1.
Only to decide I really didn’t like it, order some more flat silk, and try again. This is the lighter shade of Akhenaten’s skin colour, and as you can see, it is too light. It barely shows against the gold, and at that, the photo shows it better than it showed in real life – I had real trouble seeing it to stitch.
So that wouldn’t do, would it?
The next thing I tried was a blend of the light and dark skintones, and as you can see, there isn’t even a photo of that!
The videos are of course somewhat beyond this point – Episode 16 – “On the satisfaction of pattern building and the avoidance of confusion” is now available. Do have a look!
I recall from both the Hittite Amulet and Christus Natus Est that Or Nué projects are rather difficult to write about. They’re a little like those novels in which Nothing Happens, because one edges slowly forward, with the piece growing imperceptibly – until all of a sudden, it gallops to a conclusion. I am nowhere near that point as yet, but for the benefit of those who prefer reading to watching, I will attempt to provide occasional updates…
Here is one of the progress shots.
There are a few details I will have to come back to, as you will see if you click through to the larger image. I may have to adjust Akhenaten’s arm, for a start, and the pale blue I used to mark the creases on his kilt isn’t dark enough to do the job, so I will have to do find another thread and add some stitches.
However, the metal thread on the front of Akhenaten’s headdress shows up rather better than I feared it might. Although, as I said on one of the videos, gold thread couched with gold thread is pretty much Peak Ancient Egypt. Even Louis XIV, never an advocate of moderation in design, would take a step back, crying, “Here, I say, steady on!”
To which I reply, I am steadying on – it’s staying in!
This is a close up from slightly more recently. You can see that I’ve reached the designated edge of the design, and that rather than cutting and plunging my threads, I’m doubling back on myself, so all the gold remains on the surface. My intention is that this will be edged with some sort of braid when it is complete, and attaching a braid through the gold as it stands will be quite hard enough, without attaching it through plunged ends as well!
I’m also leaving the royal blue blocks in a sort of half-tone, with some of the gold showing through. I may decide, when the whole thing is finished, that the border designs need to be full strength if they are to frame the scene properly, but I felt that this might work, and would be an interesting experiment.
But, occasional reservations aside, I think this is going to be a very successful piece!
I’ve decided to work spiral Or Nué, as I did for Christus Natus Est, rather than the straight version I used for the Hittite Amulet. It creates more of a sense of movement, and that is very much in keeping with Amarna period art.
That, however, meant that I had to work out where to start the spiral, and as I mentioned on the first video, I had several options. The first was simply to start in the middle of the piece, but I felt that would either look very static, or, almost worse, create a rather 70s psychedelic vibe, not at all appropriate! The next three options could all be taken as emphasizing interpretations of the story of Akhenaten and Amarna. One of these was to centre the spiral in the centre of the Aten – but to be honest, for all Atenism is seen as one of the very earliest adventures in monotheism, that didn’t seem to me to reflect the stories that filter through Mary Chubb’s book.
So then I had a choice between centring the spiral on Akhenaten’s head, to reflect the idea that he espoused Atenism as a political ploy to break the power of the priests of Amun at Thebes, or centring it on his heart, to suggest that he believed he’d received a genuine religious revelation. You can see which I chose!
The second video is here, and will show you some of the progress to this point, as well as my musings as I stitch. I have a few more quandaries to sort out, but you’ll hear about those in the next episode, as I tackle them. As before, if you have any questions about what I’ve said in the video, or what I’ve done, please ask, and I will do my best to give you a sensible and useful response!
We left the design in a sort of semi-developed stage, and the next stage was to work out which border I was going to use…
So, the one on the right – no, the borders are too wide, and given the size I’m going to do it, they’ll take away too much of the design area from the family group. I do like that arrowhead design, though. I wonder where else I could put it?
I started playing around with the widths of the borders a bit more (computers are very useful for scaling fiddly things like this – more new tricks learned!), and ended up with something I think will work. You can see that there are some details I’ve not quite settled yet, and indeed, I think I’ve decided to reverse the colours in the vertical borders. The blocky colours come from having used the computer to produce a line drawing, and then coloured it in by computer as well.
The design is now transferred onto the calico, and coloured in with inktense blocks. Rather sloppily, I know, but none of this will be visible, and I will be tweaking the design as I go, in any case. This is just to give me a a better chance to keep track of which colour I’m intending to use where – that small section with Nefertiti and the two little girls on her lap was dismally confusing before I painted it!
I have begun to stitch, and just as I promised (threatened?), I’ve been recording my progress, and uploaded the first video to: https://vimeo.com/402311907. It’s about twenty minutes long, spliced together from several files, because my camera kept switching off. I did say it would be a learning experience!
I hope it will be interesting, and maybe entertaining, for you all!